How Bolt Spider Works
The Simplicity of Bolt Spider
Compatible with W-Beam Guardrail and uses common tools already carried by your crew.
Step 1: Place
Place Bolt Spider on top rail
flange & align gripper pads
with splice bolt heads.
Step 2: Engage
Engage bolt grippers using
an air or battery-powered
impact wrench with a 32mm or 1ΒΌ” socket to prevent bolt from
rotating or backing out.
Step 3: Remove
Remove seized splice nuts.
Step 4: Loosen
Loosen grippers & remove
Bolt Spider from rail.